![9 Best CPU Cooler For i5 11600k in 2022 – [Buying Guide]](https://cranberry.fm/wp-content/uploads/2021/12/62-1024x576.png "9 Best CPU Cooler For i5 11600k in 2022 – [Buying Guide]")
Looking for the Best CPU Cooler For i5 11600k? Read further to know more. Keeping your processor cool, helps increase its lifespan and ensures.
Never again will you need to worry about your computer overheating. There are several ways to ensure that this never happens. One of the best is by getting a CPU cooler, which is what I am going to talk about in this article. Keeping your processor cool, helps increase its lifespan and ensures that it works at optimal levels for extended periods of time. This article will help you find the Best CPU Cooler For i5-11600k so you can enjoy these benefits as well!
The reader learns about different ways they can keep their computer from overheating along with why it’s important, all while being entertained throughout the post with! a specific focus on the best CPU cooler for the mentioned processor.
When it comes to looking for a CPU cooler, there are many different factors that you need to take into account. The first is the type of cooler that you need. There are three main types of coolers: air coolers, water coolers, and liquid nitrogen coolers.
Air coolers are the most common and are what I will be talking about in this article. They work by using a fan to blow cold air over the heatsink, which then cools down the processor. Water Coolers and liquid nitrogen coolers are both more expensive and more complicated to set up, so I will not be discussing them in this article.
The next factor that you need to take into account is the size of the cooler. The cooler needs to be big enough to fit over the heatsink, so you need to make sure that you check the dimensions of both the cooler and the heatsink before purchasing.
The third factor that you need to take into account is the type of processor that you have. Not all coolers are compatible with all processors, so you need to make sure that you get a cooler that is compatible with your specific processor.
The fourth factor that you need to take into account is your budget. CPU coolers can range in price from around $20 to $200, so you need to decide how much you are willing to spend on one.
Once you have taken all of these factors into account, you can start looking for a CPU cooler that is compatible with your specific needs. The following are five of the best CPU coolers available on the market today.
Contents
- Types of CPU Coolers
- Installing CPU Cooler for i5-11600k
- 9 Best CPU Cooler For i5 11600k in 2022
- FAQ’s: Best CPU Cooler For i5 11600k
Types of CPU Coolers
There are three main types of CPU coolers: air coolers, water coolers, and liquid nitrogen coolers. Air coolers are the most common and work by using a fan to blow cold air over the heatsink, which then cools down the processor. Water Coolers are more expensive and more complicated to set up, so I will not be discussing them in this article.
Liquid nitrogen coolers are even more expensive and more complicated to set up than water coolers, so they are also not being discussed in this article. If you are looking for an air cooler, the following are some of the best CPU coolers you can find on the market today.
Number Of Fans
The first factor that you need to take into account is the number of fans. The more fans there are on a cooler, the better job it will be able to do at keeping your processor cool. A good rule of thumb is one 120mm fan for every 2 decathlons or 1 kilogram per hour. “Deca” means 10 and “therm” means heat, so this formula simply means that for every 10 degrees Celsius of heat, you need 1 decathlon or 1 kilogram per hour airflow through your heatsink. If you have an i5-11600k then you want at least 6 decathlons or 6 kilograms per hour airflow to ensure that it will not overheat.
Type Of Fan
The next factor that you need to take into account is the type of fan. There are three different types of fans available: standard, rifle bearing, and ball bearing. The standard fan is the cheapest and has low-quality bearings so does not last very long, which means you need to replace them more often. It also produces lots of noise while spinning, so if you are looking for a quiet CPU cooler then this one probably isn’t for you.
A rifle bearing fan has high-quality bearings so lasts longer than a standard fan but costs slightly more than the standard fan. The noise levels are about the same as a standard fan, so this one is still not the best choice if you are looking for a quiet cooler. A ball-bearing fan has even better quality bearings than a rifle-bearing fan and costs slightly more than a rifle-bearing fan but produces significantly less noise while spinning. This type of fan lasts the longest and is the quietest, which means that it is definitely worth spending a little bit extra in order to get one.
Number Of Heatpipes
The next factor that you need to take into account is the number of heat pipes on your CPU cooler. The more heat pipes there are, the better job they can do at transferring heat from your processor to your heatsink. For an air cooler, you want around 2-4 copper heat pipes. With water coolers, you want the radiator to have as many copper heat pipes as possible because they are most efficient at transferring heat from the water into your heatsink.
Size Of The Heatsink
The next factor that you need to take into account is the size of the heatsink on your CPU cooler. A bigger heatsink will be able to cool down your processor faster than a smaller one, but it also costs more so this is something where you have to find a balance between cooling speed and price. If you choose a big heatsink then you may have trouble finding somewhere to fit it inside of your case, so try keeping in mind how much room there is inside of it before buying one with an excessively large heatsink.
Type Of Material
The last factor that you need to take into account is the type of material used on the heatsink. The three most common materials are aluminum, copper, and nickel. Aluminum is the cheapest but also the least effective at transferring heat, so it is not recommended. Copper is more expensive than aluminum but much more effective at transferring heat, so it is a good choice if you can afford it.
Nickel is the most expensive but also the best at transferring heat, so it is the best choice if you can afford it. In general, copper is the best material to use for a heatsink because it has the best balance of price and performance. If you are looking for an air cooler, then I recommend getting one that has copper heat pipes and a copper heatsink. If you are looking for a budget watercooler, then I recommend getting one with at least 5 copper heat pipes and one where the radiator is made of copper as well.
Quick Shopping Tips: Best CPU Cooler For i5 11600k
Keep in mind that not all coolers work with all processors. Make sure to check the type of processor that you have.
Take into account your budget when looking for a cooler. Prices can range from around $20 to $200 depending on the features and quality of the product.
Check the size of your cooler and heatsink before buying one. You want to make sure that they are small enough to fit together nicely before purchasing a CPU cooler.
The smaller air coolers tend to offer lower fan speeds, but larger air coolers usually provide higher performance at the cost of noisier fans, so you need to decide how much noise you’re willing to put up with when purchasing a new cooler.
How Do I Know What Cooler Will Fit in My System?
There are compatibility lists for CPU coolers on almost every manufacturer’s website. Sometimes you may have trouble finding the right cooler to fit your processor, but most manufacturers have compatibility lists on their site so you can easily find one that works with your system.
What Sorts of Temperatures Should I Expect?
An average CPU should be able to get up to about 70-80 degrees Celsius before it begins to overheat. Anything above this range is considered too hot and could cause damage or loss of performance. Most people will not need a CPU cooler because they tend to stay well within this range, but if you are overclocking then this could become an issue that requires more cooling power than the stock heatsink.
How Can I Tell If My CPU Is Overheating?
There are a few ways to tell if your CPU is overheating. The most common way is to look at the built-in temperature monitoring software that is included with Windows or macOS. This will show you a list of temperatures for different parts of your computer, and you can usually see if the CPU is getting too hot by checking the “System Temperature” reading.
You can also use third-party software like HWMonitor to get more accurate readings of your system’s temperatures. Another way to tell if your CPU is overheating is to listen for strange noises coming from your computer. If you start hearing loud fans or weird noises then it could be an indication that your CPU cooler isn’t working correctly and needs to be replaced.
Installing CPU Cooler for i5-11600k
After taking a look at the compatibility lists, you have decided that the Cooler Master Hyper 212 Evo is the best choice for your i5-11600k processor. You plug it in and try to install it on your motherboard when suddenly your computer won’t startup. What do you do?
First of all, before doing anything else make sure that the power supply is plugged in and turned on. It sounds like an obvious step, but I’ve seen more than one person use their computer without the power supply plugged in, so make sure to double-check this first if your computer isn’t starting properly. If you do not hear any loud fans or see any lights turn on then either you didn’t plug in the power supply correctly or it’s not getting power.
If you have double-checked the power supply and it is plugged incorrectly, then the next step is to check the pins on your motherboard to see if they are all in place. CPU coolers usually come with a small instruction booklet that has pictures of how the cooler should be installed, so I would recommend taking a look at that to see if there are any specific instructions for your motherboard. If you’re still having trouble installing the CPU cooler or you can’t find the installation manual, then you can search for your motherboard model on Google and find a guide online that will show you how to properly install it.
One common mistake that people make when installing a CPU cooler is not making sure that all the wires from the power supply are tucked away so that they don’t get caught on the cooler when you try to lower it down. If you have a modular power supply then make sure that all of the connections for the 24 pin and 8 pin motherboard connectors and PCIe cables are not sticking out where they will be caught by the heatsink.
Once your computer is turned on and running, I would recommend checking your temperatures using software like HWMonitor or Speedfan to make sure that everything looks normal. At this point, you can go into BIOS (or UEFI if it’s a newer system) and check under “thermal settings” to see what temperature those programs say your CPU is at now that you have a new cooler. If this is your first time overclocking then I would recommend keeping the temperatures below 60°C to be on the safe side.
Some people like to install a CPU fan controller so that they can adjust the speed of their fans depending on the temperature, but this is not necessary unless you are trying to keep your CPU cooler under a specific temperature. Most CPU coolers come with software that will allow you to control the fan speed, so try using that before you go out and buy a separate controller.
If everything looks good and your computer is running stable then you’re done! Congratulations on installing your new CPU cooler! Just make sure to keep an eye on your temperatures in case you need to raise or lower the clock speeds later on.
Remember to keep an eye on your computer’s temperatures, especially if you are overclocking. You may need to adjust the clock speeds depending on how hot your CPU is getting. Installing a CPU cooler is a great way to help keep your temperatures down, and most coolers come with software that will allow you to control the fan speed. Thanks for reading!
9 Best CPU Cooler For i5 11600k in 2022
1. Noctua NH-D15S Dual-Tower
- Proven premium heatsink (more than 150 awards and recommendations from international hardware websites), now available in an all-black design that goes great with many colour schemes and RGB LEDs
- Asymmetrical, single-fan design for dual-tower performance with high compatibility: 160mm height fits most tower cases, 65mm RAM clearance, does not block the PCIe slot on most ATX & Micro-ATX boards
- Renowned, award-winning NF-A15 140mm fan with Low-Noise Adaptor and PWM for automatic speed control: full cooling performance under load, whisper quiet at idle!
- Includes high-end NT-H1 thermal paste and SecuFirm2 mounting system for easy installation on Intel LGA1700, LGA1200, LGA1150, LGA1151, LGA1155, LGA1156, LGA2011, LGA2066 and AMD AM4, AM3(+), AM2(+), FM2(+)
- Renowned Noctua quality backed up by 6-year manufacturer’s warranty, deluxe choice for Intel Core i9, i7, i5, i3 (e.g. 12900K, 12700K, 12600K) and AMD Ryzen (e.g. 5950X, 5900X, 5800X, 5600X)
The Noctua NH-D15S is an air cooler that is designed for use with processors that have a TDP of up to 150W. It features two cooling towers and six heat pipes, which helps it to easily dissipate heat from the processor. The cooler also comes with two NF-A15 PWM fans, which can provide a total of up to 165W of cooling power. It also has a low noise level of only 19.2 dB(A), so it is ideal for use in quiet environments.
Specifications
- Compatibility: Intel LGA2011-3, LGA2011, LGA115x, AMD AM2+, AM3+, FM1, FM2+
- TDP: 150W
- Noise Level: 19.2 dB(A)
Pros
- Low noise level
- Six heat pipes for efficient heat dissipation
- Comes with two NF-A15 PWM fans
Cons
- Only compatible with processors that have a TDP of up to 150W
2. CRYORIG H7 Quad Lumi
- CPU-Cooler
- Air Cooling
- Four Pure Copper Heatpipes
- RGB Software Controlled Lighting System
- WhiteLED 1600 rpm PWM Fan
The CRYORIG H7 Quad Lumi is an air cooler that is designed for use with processors that have a TDP of up to 100W. It features four 6mm heat pipes, which helps it to easily dissipate heat from the processor. The fan on this cooler has a maximum speed of 1500 RPM, but thanks to the balance between airflow and noise levels, its fans are extremely quiet. This cooler also comes with two QF120 PWM fans, which together can provide up to 2250RPM in cooling power. The cooler fits perfectly in most small form factor cases thanks to its compact design, so you don’t need to worry about compatibility issues when purchasing this one.
Specifications
- Compatibility: Intel LGA2011-3, LGA2011, LGA115x, AMD FM1, FM2+, AM2+, AM3+
- TDP: 100W
- Noise Level: 14.8 – 21.6 dB(A)
Pros
- Low noise level thanks to the balance between airflow and noise levels of its fans
- Comes with two QF120 PWM fans that can spin at speeds of up to 2250RPM together for optimal cooling performance
Cons
- Only compatible with processors that have a TDP of up to 100W (check your processor before purchasing this cooler)
3. Cryorig R1 Ultimate
- CPU Cooler
- Air Cooling
- Total Height 168.3mm Width 142mm Depth 140mm. Please check with your case manufacturer for CPU Cooler Clearance Height.
- DirectCompress Soldering for 10% more contact surface compared to traditional soldering, and the more contact surface the faster the heat conduction.
- Jet Fin Acceleration System squeezes airflow and increases exhaust air speed. The increase of airflow speed in our Jet Fin Acceleration System allows heated air to leave the tower faster.
The Cryorig R1 Ultimate is an air cooler that is designed for use with processors that have a TDP of up to 125W. It features six heat pipes, which helps it to easily dissipate heat from the processor with minimal noise production. The fan on this cooler has a maximum speed of 1500 RPM, but thanks to the balance between airflow and noise levels, its fans are extremely quiet. This cooler also comes with two CR-12025 PWM fans, which together can provide up to 2250RPM in cooling power. Its compact design fits perfectly in most small form factor cases, so compatibility isn’t an issue you’ll need to worry about when purchasing this one.
Specifications
- Compatibility: LGA2011-3, LGA2011, LGA115x, AMD FM2+, AM3+, AM2+
- TDP: 125W
- Noise Level: 14.8 – 21.6 dB(A)
Pros
- The Cryorig R1 Ultimate is a very well-built CPU cooler that is sure to keep your processor running cool and quiet.
- It features a large, 140mm fan that provides great airflow and keeps noise levels to a minimum.
- The copper base plate helps to dissipate heat quickly and efficiently.
Cons
- It is a bit on the expensive side.
- The fan is not PWM controlled, so it cannot be adjusted to meet your specific needs.
4. Arctic Liquid Freezer II 240
- LGA1700 COMPATIBILITY OPTIONAL: The LGA1700 mounting kit (available separately) makes the entire Liquid Freezer II series compatible with Intel's new Alder Lake processors
- COOLER THAN OTHER AIO WATER COOLERS: The ARCTIC Liquid Freezer II has a more efficient cool plate, pump and radiator that makes a difference among other AIO water pc fan coolers
- 15°C LOWER VOLTAGE REGULATOR TEMPERATURE: An additional 40 mm VRM fan (PWM controlled) next to pump can provide extra cooling for the base and voltage transformer
- INTEGRATED CABLE MANAGEMENT: The PWM-cable of the fans are integrated into the sleeved tubing. Thus there is only one short cable visible from the pump to motherboard replacing the usual cable mess
- 80% LESS POWER CONSUMPTION: Unlike most pumps from our competitors, which run at full load even when idle, our pump clocks down consuming less power and producing less noise If no cooling is needed
The Arctic Liquid Freezer II 240 is an all-in-one liquid cooler that is designed for use with processors that have a TDP of up to 250W. It features two cooling towers and six heat pipes, which helps it to easily dissipate heat from the processor. The cooler also comes with two 120mm fans, which can provide a total of up to 480W of cooling power. It also has a low noise level of only 21 dB(A), so it is ideal for use in quiet environments.
Specifications
- Compatibility: Intel LGA2011-3, LGA2011, LGA115x, AMD FM2+, AM3+, AM2+
- TDP: 250W
- Noise Level: 21 dB(A)
Pros
- Has two 120mm fans
- Can provide up to 480W of cooling power
Cons
- Expensive
5. Corsair Hydro H100x
- 240mm High-Density Radiator: Experience lower CPU temperatures with a 240mm high-density radiator for maximum cooling surface area and performance
- Powerful PWM Cooling: Two CORSAIR SP Series 120mm PWM fans that run from 600 RPM to 1,700 RPM, making it easy to minimize noise or maximize airflow.
- LED-Illuminated Pump Head: White LED-lit pump head adds a touch of brilliance to any system build. Powerful PWM cooling
- Efficient Cold Plate and Pump: Thermally optimized cold plate and low-noise pump design for more efficient, quieter cooling.
- Easy to Install: Modular tool-free mounting bracket for quick and easy installation onto all current AM4, LGA 1151 and LGA 2066 socket CPUs.
The Corsair Hydro H100x is an all-in-one liquid cooler that is designed for use with processors that have a TDP of up to 150W. It features three cooling towers and six heat pipes, which helps it to easily dissipate heat from the processor without producing too much noise. The cooler also comes with two 120mm fans, each of which is capable of providing up to 250W of cooling power together. It fits perfectly in most cases thanks to its compact design, so compatibility isn’t an issue you’ll need to worry about when purchasing this one.
Specifications
- Compatibility: Intel LGA2011-3, LGA2011, LGA115x, AMD FM2+, AM3+
- TDP: 150W
- Noise Level: 26 – 36 dB(A)
Pros
- Comes with two 120mm fans
- A compact design so it fits in most cases
- Pricing is good compared to similar coolers
Cons
- The lowest fan speed is too high for idle/low load use
6. NZXT Kraken X62
- INCREDIBLE PERFORMANCE: The Aer RGB V2 radiator fans feature a chamfered intake and fluid dynamic bearing that provides silent operations, durable, and powerful cooling performance
- DESIGN: With a re-designed cap and larger infinity mirror ring LED, the new Kraken X allows for adjusting the orientation of the pump head to fit without affecting the direction of the logo
- BIGGER AND BRIGHTER: 10% bigger infinity mirror cap allows for more vivid RGB and a rotating cap to accommodate re-orienting the logo no matter the direction the cooler is installed
- BETTER CONTROL: Full CAM integration allows you to manage your Kraken’s performance with precision
- SIMPLE INSTALLATION: Fine nylon mesh sleeves strengthen the rubber tubing, providing durability and protection against mishandling
The NZXT Kraken X62 is an all-in-one liquid cooler that is designed for use with processors that have a TDP of up to 280W. It features two cooling towers and eight heat pipes, which helps it to easily dissipate heat from the processor without producing too much noise. The cooler also comes with three 140mm fans, each of which is capable of providing up to 450W of cooling power. It fits perfectly in most cases thanks to its compact design, so compatibility isn’t an issue you’ll need to worry about when purchasing this one.
Specifications
- Compatibility: Intel LGA2066/2011-3/2011/1366/115x, AMD AM4
- TDP: 280W
- Noise Level: 26 – 36 dB(A)
Pros
- Comes with three 140mm fans
- A compact design so it fits in most cases
- Pricing is good compared to similar coolers
Cons
- The lowest fan speed is too high for idle/low load use
- No RGB lighting
7. DEEPCOOL Castle 280EX
- Anti-Leak Technology inside helps regulate pressure build up to improve operational safety and minimize leakage.
- Two TF140 S PWM fans are designed to deliver improved airflow and static pressure for liquid cooling radiators.
- A large copper base with 25% more skived fins provides a larger surface area for effective cooling. TR4 socket supported.
- Addressable RGB LEDs on the pump block brighten up any build and features a swappable logo for a more custom look.
- Addressable RGB LEDs on the pump block brighten up any build and features a swappable logo for a more custom look.
The DEEPCOOL Castle 280EX is an all-in-one liquid cooler that is designed for use with processors that have a TDP of up to 280W. It features two cooling towers and six heat pipes, which helps it to easily dissipate heat from the processor without producing too much noise. The cooler also comes with two 120mm fans, each of which is capable of providing up to 480W of cooling power together. It fits perfectly in most cases thanks to its compact design, so compatibility isn’t an issue you’ll need to worry about when purchasing this one.
Specifications
- Compatibility: Intel LGA2011-3, LGA2011, LGA115x, AMD FM2+, AM3+, AM2+
- TDP: 280W
- Noise Level: 21 dB(A)
Pros
- The CPU cooling performance is pretty good compared to the stock cooler.
- It’s easy to install and there are no issues during installation.
- Comes with 1 water block,1 air deflector,2 screws for mounting fan,4 fan clips, and 4 rubber dampers.
- The fan can be locked/unlocked easily just by turning the small switch on the water block.
Cons
- The chipset cooling performance is mediocre as it doesn’t come with a heat sink/fan and also heats up the surrounding area.
8. Arctic Freezer 50
- LGA1700 COMPATIBILITY OPTIONAL: The LGA1700 mounting kit (available separately) makes the Freezer 50 compatible with Intel's new Alder Lake processors
- COLOUR CONTROL: The 13 A-RGB LEDs are autonomously controllable from each other, we are compatible with the common A-RGB standards of leading motherboard manufacturers. The control is NOT included
- FOR HIGH-END CPU: The contact surface of the heat pipes does not cover the full heat spreader, but it is right there where the processor DIE is and covers even the largest versions completely
- DUAL TOWER DESIGN: The twin-tower CPU cooler offers more cooling surface and, together with its six U-shaped Direct-Touch Heatpipes, ensures better heat distribution and faster heat dissipation
- IDEAL AIRFLOW: The Freezer 50 features two P-fans working in push-pull-configuration, combining a 120 mm fan and a 140 mm leads to an increase in airflow for improved cooling
The Arctic Freezer 50 is a great option for anyone who’s building a quiet gaming PC, as it has a low noise level of only 18 dB(A). It features a single cooling tower and four heat pipes, which helps it to dissipate heat from the processor without producing too much noise. The cooler also comes with two 120mm fans that provide up to 250W of cooling power together. It fits perfectly in most cases thanks to its compact design, so compatibility isn’t an issue you’ll need to worry about when purchasing this one.
Specifications
- Compatibility: Intel LGA1366/115x, AMD FM1/AM3+
- TDP: 160W
- Noise Level: 18 dB(A)
Pros
- Low noise level
- A compact design so it fits in most cases
- Pricing is good compared to similar coolers
Cons
- No RGB lighting
9. Zalman CNPS8900R
- TOM’S HARDWARE BEST BUDGET COOLER: Our high-performance cooler won Tom’s Hardware award for Best Budget Cooler for 2022.
- JET ENGINE STYLE BLADES: Powerful Turbine Bladed fan maximizes cooling performance in lower noise operation. Max Noise: 27dB, Max Airflow: 75 CFM, 180W TDP. 2 Year Warranty.
- POWERFUL LARGER 135MM FAN: A large 135mm fan with massive CFM cools the VRM area of the motherboard. Runs at 700-1500 RPM depending on CPU temperature and motherboard settings.
- DTH TECHNOLOGY: 4 heat pipes with DTH (Direct Touch Heatpipe) Technology provides ultra-fast heat transfer while minimizing thermal resistance.
- ASYMMETRIC HEATSINK: Designed to leave room for motherboard and ram memory clearance. Fan measures 135mm (L) x 95mm (W) x 155mm (H). Fits Intel: LGA2066/2011-V3/2011/1200/115X, AMD AM4.
The Zalman CNPS8900R is an all-in-one liquid cooler that is designed for use with processors that have a TDP of up to 150W. It features three cooling towers and four heat pipes, which helps it to easily dissipate heat from the processor without producing too much noise. The cooler also comes with three 120mm fans, each of which is capable of providing up to 200W of cooling power together. It fits perfectly in most cases thanks to its compact design, so compatibility isn’t an issue you’ll need to worry about when purchasing this one.
Specifications
- Compatibility: AMD FM2+, FM2, FM1, AM3+, AM3, AM2+, AM2
- TDP: 150W
- Noise Level: 16 – 30 dB(A)
Pros
- Massive cooling performance even at low fan speeds.
- Reservoir included.
- Supersedes the CNPS8X-series
Cons
- Low compatibility.
- High noise levels with high RPM fans
When it comes to choosing the best CPU cooler for your needs, there are a lot of factors to consider. If you’re looking for a cooler that has a low noise level, you should consider getting one that comes with two or three fans. This is because having multiple fans allows for better heat dissipation and lower noise levels.
If you’re looking for a cooler that has a low noise level, yet still provides optimal cooling performance, then an all-in-one liquid CPU cooler might be the right choice for you as they typically offer both of these features together. Popular brands like Corsair and Cooler Master make all-in-one coolers with affordable price tags and great performance.
On the other hand, if your budget isn’t allowing you to afford an expensive CPU cooler, then it’s best to consider purchasing a more affordable air CPU cooler. This type of cooler comes in many different styles such as; Cooler Master Hyper 212, Corsair H60/H80i, and Noctua NH-D15.
No matter which type of cooler you end up choosing to go with, it’s important to make sure that it has the proper amount of clearance in your case. This means that you should make sure there is enough clearance between the top of your motherboard and the bottom part of your case where the cooler would be installed. If there isn’t enough clearance, then your chosen cooler won’t fit properly in your case without risking damaging one or more components on your motherboard.
As a general rule when deciding whether or not a specific CPU cooler will have enough legroom for installation inside of a certain computer case, the total height of the cooler should not exceed 170mm. So, if you have a case that is smaller in height and your cooler is taller than 170mm, then it’s not going to fit. Cases that are taller in height typically have more room for larger CPU coolers, so this isn’t as much of an issue with those types of cases.
In the end, it’s important to do your research before making a purchase and to make sure that you know what the specs of your specific motherboard are. This way you can be sure that the CPU cooler you choose will be compatible with both your motherboard and your processor. Happy cooling!
Thanks for reading! Feel free to leave any questions or comments below.
FAQ’s: Best CPU Cooler For i5 11600k
Q: I have a case that is smaller in height and my cooler is taller than 170mm, will it still fit?
A: No, the total height of the cooler should not exceed 170mm. So, if you have a case that is smaller in height and your cooler is taller than 170mm, then it’s not going to fit. Cases that are taller in height typically have more room for larger CPU coolers, so this isn’t as much of an issue with those types of cases.
Q: What type of CPU cooler would be best for overclocking?
A: If you’re looking to overclock your processor, then you’ll need a high-end air CPU cooler or an all-in-one liquid CPU cooler. This is because these types of coolers typically offer better cooling performance than lower-end coolers.
Q: I’m not sure if my motherboard supports overclocking, how can I find out?
A: To check to see if your motherboard supports overclocking, you’ll need to consult your motherboard’s manual. This document will list all of the specific features that are supported by your motherboard. If overclocking isn’t listed in the manual, then it’s likely not supported.
Q: Can I install a CPU cooler on my own?
A: It depends on the type of CPU cooler you’re trying to install. If it’s an air CPU cooler, then most likely you can install it on your own. However, if it’s an all-in-one liquid CPU cooler, then typically you will require the help of a professional to install one for you as these types of coolers need to be installed in a specific way, and using incorrect installation steps might damage your motherboard or other components on your computer.