8 Best 140mm CPU Cooler in 2022 – Expert Guide and Review

Had you been looking for Best 140mm CPU cooler? Read further to know more.

If you’re looking for a new motherboard, and want to make sure that you’re getting the best cooling solution, it’s worth knowing which type of cooling is best for your particular setup.

For example, if you’re using a GPU card, you might want to avoid an air-cooled board, as it may not be able to effectively cool your graphics card. On the other hand, if you’re running a CPU, you might want to consider an air-cooled board, as they tend to be more efficient at cooling your processor.

The most common complaint about high-end CPUs is that they get too hot. This is a problem because you need a CPU cooler if you want to keep the fan from spinning at a constant speed. This article will go over the best 140mm CPU coolers. It covers the different types of fans, and it gives you some tips on how to choose the right one.

This article focuses exclusively on the 140mm models, but there are plenty of 140mm air-cooled and liquid CPU coolers out there. You can check our list of the best 140mm liquid CPU coolers here.

Because of the wide variety of CPUs out there, this guide does not aim to be an all-encompassing guide to every single CPU cooler on the market. Rather, it will focus on one specific type of cooler – dual tower, low profile units. We will also provide some recommendations, based on our own experience with different coolers.

Dual tower, low profile units are not for everyone though. If you have more than a standard-sized case or you’re using a large motherboard with a lot of PCI-E slots, then chances are you won’t find any dual-tower, low-profile coolers which fit all of your needs. If that’s the case, you might want to consider getting a low-profile CPU cooler for your smaller case.

Best 140mm CPU Cooler

1. Noctua NH-U14S Premium PC CPU AIR Cooler PC with NF-A15 140mm Fan for AMD Ryzen AM4 / Intel Socket LGA 1200, 1155, 1151

With a mere 14cm height, the NH-U14S is one of the most compact CPU coolers available. It uses a single 120mm fan, which is sufficient for high-end CPUs.

The Noctua U-series is known for its excellent cooling performance, and the NH-U14S is no exception. It can be used with Intel’s LGA 2011/LGA 2066 socket and LGA 1151/1155/1156/1157/1180 sockets and has a maximum capacity of up to 140W.

The large Heatpipe design allows the cooler to absorb more heat from the CPU, which means that it can easily dissipate heat from your motherboard, RAM modules, graphics card, and other components. It also comes with a PWM fan controller to provide maximum stability and efficiency, and an automatic speed control feature for the fan.

I like how the NT-H1 thermal compound is included in the package. You don’t have to buy it separately – it’s already included. This makes it easier to install and saves you time and money.

The SecuFirm2 mounting system is also pretty handy. It’s easy to remove the cooler and doesn’t require any tools.

This Noctua cooler is perfect for people who want to save space but still get excellent cooling performance.

It has a very sleek design that makes it look great, and it’s easy to install with the included installation kit.

The large heatsink holds up to eight DDR4 memory modules, so it’s ideal for people with large systems. It’s also compatible with LGA1150 CPUs, which means you can upgrade your system without buying an entirely new motherboard.

The fan is a Noctua NF-A15 140mm PWM fan that supports PWM control for automatic speed adjustment, which is always a nice feature. It’s also Noctua’s largest fan, so it can push a lot of air through the heatsink.

This is a great cooler for people who want to upgrade their RAM and want to keep compatibility with existing motherboards. It has excellent cooling performance and is very quiet, so it’s perfect for people who don’t want to disturb others in their living room.

2. Phanteks Slim Twin Tower Heatsinks, 140mm PWM CPU Cooling PH-TC14S, PH-F140HP II PWM High Static Pressure Fan

Phanteks is one of the most reputable brands in the market, and they’re known for making high-quality PC cases. The Slim Twin Tower heatsinks are designed with slim fins and six heat pipes that are stacked on top of each other. This creates better heat transfer from the heat pipe to the aluminum fins.

The fins are also made of aluminum, which is a more thermally conductive material than copper or aluminum. Slim design. Better convective heat transfer. Slim Design. Six 6mm U-Type Nickel-plated heat pipes with slim aluminum stacked fins. Improve heat distribution on the new aluminum fins 100% compatible with high VRM Modules and high RAM with heat sinks on newer motherboards.

At only 4.83 inches in width, the PH-TC14S is designed specifically to follow INTEL’s Keep-Out-Zone. Equipped with PH-F140HP II PWM High Static Pressure Fan. New seven-blade design. MVB II enhances thermal convection inside of the case.

Upgradable to dual fans. Compatible with 120mm fans. Includes Fan accessories for two fans setup (compatible with both 140mm and 120mm Phanteks fans). Phanteks’ patented P.A.T.S technology.

Can withstand temperatures of up to 200 DegreeC. Increases cooling performance. Deflects other thermal radiation from other heat sources. Includes Solisku Bracket for easy installation & direct contact with the CPU Compatible Intel LGA 2011/115X/1366/775, AMD FM1/FM2(+)/AM3(+)/AM2(+) (Stock back-plate required).

PH-NDC is made of high purity Nano diamond-like particles. Superb quality thermal compound. Improves the thermal conductance between the components.

They have six 6mm U-Type nickel-plated heat pipes with aluminum fins that enhance heat distribution. These heatsinks are great for Intel’s K-series CPUs, as well as older and newer motherboards.

If you’re looking for a high-performance heatsink, then you’ll love these heatsinks. They have a slim profile that won’t take up too much space on your motherboard. They also have six 6mm U-Type nickel-plated heat pipes, which are great for high-end CPUs. They have six 6mm U-Type nickel-plated heat pipes that enhance heat distribution.

These heatsinks come in a black finish, so they look sleek. The nickel-plated heat pipes ensure that the heatsinks have excellent thermal conductivity. You can also use them with any of your favorite motherboards, CPUs, and RAM modules.

3. Noctua NF-A15 PWM, HS-PWM chromax Black Swap, Premium Quiet Fan, 4-Pin

This is one of the best silent fans I’ve ever used. It’s so quiet that you barely know it’s on unless you put your ear right up against it. The Noctua NF-A15 PWM has an extremely low noise level, which is why it’s the perfect fan for most applications, including silent PC gaming.

I’ve never had any problems with it at all – even when the fan is on high speed it’s still silent. The low noise levels make this fan a great choice for most people.

It has a 14cm PWM fan that comes with a 5-year warranty and a 3-year warranty for the motor. The fan is also equipped with a special frame that makes it more stable than other fans and has 120mm mounting holes for easy installation.

It’s a 140mm fan, so it’ll fit into all types of systems and it’s got a very low noise level. The fan is designed to be highly efficient, so it won’t use much power and it’ll keep your system cool even if it’s running at full speed.

I’ve been using it for the past few months and it’s worked great for me.

It’s a good choice if you’re looking for a fan that doesn’t have any moving parts and will last a long time. I would recommend this fan. It’s a great upgrade from my previous fan, and I’m glad that I bought it.

On the other hand, it’s not the best fan for gaming because it has a low noise level.

4. CORSAIR iCUE H170i ELITE CAPELLIX Liquid CPU Cooler – 33 Dynamic RGB LEDs – 140mm Fans – 420mm Radiator – COMMANDER CORE Smart Lighting Controller

If you’re looking for a high-performance CPU cooler that can also handle graphics cards, then the CORSAIR iCUE H170i Elite is the right choice.

The CORSAIR iCUE H170i Elite has all the right features to make it an excellent choice.

The radiator is massive – 420mm, which provides enough surface area to cool the most powerful CPUs in the market. This means that even the most powerful graphics cards will be cooled adequately. It also comes with a high-quality 120mm fan at the front and 8 high-performance 140mm fans at the rear.

With such a large radiator, the fan speed should be adjusted carefully. You want the fans to operate at low speeds to ensure they don’t create too much noise, but high speeds to ensure the best cooling possible.

The CORSAIR iCUE Commander Smart RGB Lighting and Fan Speed Controller will allow you to do this, with up to six RGB PWM fans and three magnetic levitation fans included.

These fans are all capable of delivering immense airflow, with eight RGB LEDs per fan, and each one can be controlled individually via PWM. If you’re looking for an excellent CPU cooler that can handle graphics cards, then the CORSAIR iCUE H170i Elite is the right choice.

 I have an i5-2500K and a Corsair HX1200i power supply.

I had been looking for a water cooler for a while and my friend recommended this one, so I decided to give it a try. It’s a pretty good unit, and I don’t regret buying it at all.

The pump head is the main selling point of this water cooler, as it’s able to pump more water than any other cooler that I’ve tried. It has a massive 420mm radiator that is large enough to cool your CPU and RAM with ease. The LED lights are bright and beautiful, and they can be easily controlled via the CORSAIR iCUE COMMANDER CORE Smart RGB Lighting and Fan Speed Controller.

This water cooler is compatible with Intel LGA1700 motherboards, which means that you can use the iCUE Commander with any new motherboard that comes out this year. It also comes with a couple of spare fans and RGB lighting modules, so you don’t need to worry about finding replacements if any of them fail.

So far, this is my favorite water cooler, and I’m going to buy another one soon. It’s got a lot of great features, and it does what it says on the box.

5. CoolerMaster MasterAir MA624, Stealth CPU Air Cooler, 6 Heat Pipes, Nickel Plated Base, Dual Aluminum Black Fins

If you’re looking for a quiet, low-profile cooler, the CoolerMaster MasterAir MA624 is the one to get. This cooler is a great option if you’re looking for a solid, high-quality cooler that won’t make too much noise while doing its job.

It’s a great option if you want something quiet, but don’t mind paying a bit more for it. This cooler features a push-pull system of dual fans that ensures optimal airflow. It also has 6 heat pipes and a nickel-plated base for optimal cooling.

I’ve had other coolers with similar features, but they all made a lot of noise when running. The CoolerMaster MA624 is silent, which is great for those who like a low-noise setup.

I didn’t have any problems with the installation, though I did have to use some heat shrink tubes to ensure the fan wires wouldn’t interfere with the cable management.

It comes with an all-black top cover that’s made from aluminum, which is strong enough to withstand even the most rigorous gaming sessions.

The dual tower heatsink has six heat pipes, and they provide ample surface area for heat dissipation. They also have a nickel-plated base, so they’re resistant to corrosion and oxidation.

This heatsink is compatible with both Intel LGA 1151 and AMD AM4 sockets, so you don’t need to worry about compatibility issues. It also includes a RAM clearance option if you want to use a third fan to cool the RAM.

The dual fan setup is Push-Pull, so it uses one fan to push air and another to pull air from the side. This design creates optimal airflow for your PC.

CoolerMaster claims that this heatsink can be overclocked, but I wouldn’t recommend that. They also claim that it can withstand up to 100°C temperatures, which is enough for most gaming and overclocking needs.

6. Cooler Master MasterLiquid ML280, Mirror ARGB Close-Loop AIO CPU Liquid Cooler, Mirror ARGB Pump, 280 Radiator, Dual SickleFlow 140mm

The MasterLiquid ML280 is one of the best water coolers in its class, especially when it comes to cooling. It’s designed to be an all-in-one solution for your PC cooling needs and comes with a ton of features.

The MasterLiquid ML280’s 3rd generation dual chamber pump delivers an optimal flow rate of up to 280 L/h, and the larger surface area of the fins on the radiator increases heat dissipation by 30% compared to previous versions. This cooler also features a new sickle flow 140 non-LED fan which is quieter than the previous version.

The MasterLiquid ML280 also has an ARGB lighting solution, which lets you customize the lighting effects. This feature can be used for showing off your favorite team logo or creating some interesting patterns on the back of the case.

I’m impressed by how well this cooler can keep my computer running cool. I’ve been using it for over a year now and it’s still going strong. I like the large surface area of the fins on the radiator. It makes sure that the heat is dissipated better and quickly, so my PC stays at a good temperature.

I also appreciate that there are lots of customizable lighting effects in the ARGB lighting solution. It’s easy to change the colors, patterns, and lighting intensity, which allows me to create some cool patterns on the back of the case.

The MasterLiquid ML280 is an excellent all-in-one solution for your PC cooling needs. It has tons of features, but it doesn’t come with too many extras. It’s a great choice if you want something simple and powerful.

Cooler Master has been making quality products for over 15 years now, and they’re well known for their cooling products. It’s one of the only air coolers that you can get that will perform at a good level in the middle to low range.

The MasterLiquid ML280 offers a good balance between performance and price. The pump is quiet and effective at delivering cool air, and it doesn’t use any electricity either. It’s also pretty big, so it’s perfect for those who have larger rooms. If you’re looking for a reliable, durable, and efficient cooler, then this is the one for you.

7. Noctua NH-D15 Premium CPU Cooler with 2X NF-A15 PWM 140mm Fans, and dual-tower design with 6 heatpipes

The Noctua NH-D15 is a dual tower cooler that comes in two sizes: NH-D15 and NH-D15S. I reviewed the smaller one, but it’s also available in a larger size as well.

I was pleasantly surprised with how much more efficient this cooler is compared to its predecessor. The NH-D14 was a fantastic cooler, and it did its job very well, but it didn’t have any outstanding features. It was a good choice for people who wanted to build a quiet PC, but it wasn’t worth the money.

The NH-D15 has several interesting features that make it worth a look. First, it uses Noctua’s proprietary NT-H1 thermal compound instead of the standard thermal paste. This should help keep things cool and quiet, and it does.

It also has a unique heat pipe layout that allows for better airflow, which is great because the NT-H1 doesn’t stick to the heat pipes very well. I can’t say if this improves performance, but it certainly keeps things cooler.

The fans are also a big improvement over the previous model. They’re much quieter, and they spin at a slower speed, which also helps keep things cooler.

The NT-H1 is also very easy to apply, which makes it much easier to install. It also requires less effort than the thermal paste to apply, which is always a good thing.

Another thing that I like about this cooler is its SecuFirm2 multi-socket mounting system. It allows you to mount two fans on the same side of the cooler, so you can run one fan while the other fan is off. This is great for cooling purposes as you won’t be blowing hot air into your case, and it also helps keep things cool.

I’m a big fan of the SecuFirm2 system because it’s very easy to use. You just slide the brackets on and then screw in the screws. You can also remove the brackets easily too. This cooler is a great choice for people who want to build a quiet PC, and I think it will make a great addition to any PC.

The Noctua NH-D15 uses a dual-tower design, with two fans placed on either side of the heatsink. This allows the airflow to be directed to the hottest areas of the cooler, where it’s needed the most. It also increases the pressure and speed of the air that flows through it, making the cooler even more effective at cooling down the system.

As you can see from the photos, the dual-tower design is quite similar to that of the NH-D14, but there are some slight differences.

For one, the NH-D15 has two 140mm fans instead of just one. These are two of Noctua’s premium NF-A15 fans, and they’re designed to deliver top performance.

8. Corsair iCUE H115i RGB, Pro XT, 280mm Radiator, Dual 140mm PWM Fans, Software Control, and Liquid CPU Cooler

I was looking for a good quality water cooling setup, but one that didn’t cost a fortune. Corsair’s iCUE H115i RGB is perfect for my needs, and it’s reasonably priced too. Corsair offers a wide range of products, and their iCUE H115i RGB is no exception.

It comes with two 140mm magnetic Levitation PWM fans, which are extremely quiet and deliver incredible airflow. They spin at 400-2200 RPM, which means they’ll run at full speed when your CPU is under stress, and slowly stop when the temperature drops. This provides great cooling performance, and it allows the system to be silent at idle.

It also includes a pump, and remote control, which means you can control the fans and pump from anywhere in the room. It has a USB port for extra flexibility, and it comes with Corsair’s iCUE software, which allows you to control the fans and pump from your computer, smartphone, or tablet.

This is a great water cooling system for people who want a good quality water cooling setup that’s quiet, powerful, and affordable. With the H115i RGB, Corsair delivers one of the most powerful RGB LED-lit pumps available. The iCUE H115i RGB has two 140mm fans that are capable of moving a lot of air.

Each fan is equipped with an array of 16 individually addressable RGB LEDs. You can use them to create stunning customizable lighting effects that match your build.

The pump features two-speed modes, allowing you to choose how fast or slow the fans run. The Zero RPM mode cuts the fans completely off when the temperature drops below the set point. This eliminates fan noise and makes for a quieter experience.

The iCUE software allows you to control and synchronize your cooler’s RGB lighting with all iCUE compatible devices. You can also monitor CPU and coolant temperatures and adjust fan and pump speeds.

This is one of the most powerful pumps on the market today, and it’s perfect for people who want to add RGB lighting to their PC. With the ECU software, you can easily control and synchronize your cooler’s RGB lighting with all iCUE compatible devices.

You can monitor CPU and coolant temperatures and adjust fan and pump speeds. This pump also has a lot of useful features that make it an excellent choice for people who build PCs. It’s a great product for someone who wants to upgrade their cooling system.

FAQs – Best 140mm CPU cooler

Conclusion – Best 140mm CPU cooler

But if you are looking for even better cooling performance, you should consider water cooling radiators. When you have the right CPU cooler and case fan combination, your computer will perform better than it ever has before.

Overall, the Corsair H115i RGB is a great water cooling setup for people who want a good quality water cooling setup that’s quiet, powerful, and affordable. The Corsair H115i RGB is one of the most powerful pumps on the market today, and it’s perfect for people who want to add RGB lighting to their PC.

It comes with two 140mm magnetic Levitation PWM fans that are capable of moving a lot of air. Noctua NH-U14S 140 mm Fan is a budget-friendly solution that offers excellent cooling performance at an affordable price.